isapnp.c
内容 | 行数 | 比率 |
---|---|---|
コメント行数 | 237 | 31% |
空行行数 | 117 | 15% |
実行行数 | 401 | 54% |
合計行数 | 755 | 100% |
内容 | 定義数 |
---|---|
関数数 | 34 |
No. | 型 | 名称 | 属性 | 説明 |
---|---|---|---|---|
1 |
![]() |
isapnp_write_address | static inline void | |
2 |
![]() |
isapnp_write_data | static inline void | |
3 |
![]() |
isapnp_read_data | static inline unsigned int | |
4 |
![]() |
isapnp_write_byte | static inline void | |
5 |
![]() |
isapnp_read_byte | static inline unsigned int | |
6 |
![]() |
isapnp_read_word | static inline unsigned int | |
7 |
![]() |
isapnp_set_read_port | static inline void | Inform cards of a new read port address |
8 |
![]() |
isapnp_serialisolation | static inline void | Enter the Isolation state. |
9 |
![]() |
isapnp_wait_for_key | static inline void | Enter the Wait for Key state. |
10 |
![]() |
isapnp_reset_csn | static inline void | Reset (i.e. remove) Card Select Number. |
11 |
![]() |
isapnp_wake | static inline void | Place a specified card into the Config state. |
12 |
![]() |
isapnp_read_resourcedata | static inline unsigned int | |
13 |
![]() |
isapnp_read_status | static inline unsigned int | |
14 |
![]() |
isapnp_write_csn | static inline void | Assign a Card Select Number to a card, and enter the Config state. |
15 |
![]() |
isapnp_logicaldevice | static inline void | |
16 |
![]() |
isapnp_activate | static inline void | |
17 |
![]() |
isapnp_deactivate | static inline void | |
18 |
![]() |
isapnp_read_iobase | static inline unsigned int | |
19 |
![]() |
isapnp_read_irqno | static inline unsigned int | |
20 |
![]() |
isapnp_delay | static void | |
21 |
![]() |
isapnp_lfsr_next | static inline unsigned int | Linear feedback shift register. |
22 |
![]() |
isapnp_send_key | static void | Send the ISAPnP initiation key. |
23 |
![]() |
isapnp_checksum | static unsigned int | Compute ISAPnP identifier checksum |
24 |
![]() |
isapnp_peek_byte | static inline unsigned int | |
25 |
![]() |
isapnp_peek | static void | Read resource data. |
26 |
![]() |
isapnp_find_tag | static int | Find a tag within the resource data. |
27 |
![]() |
isapnp_find_logdevid | static int | Find specified Logical Device ID tag |
28 |
![]() |
isapnp_try_isolate | static int | Try isolating ISAPnP cards at the current read port. |
29 |
![]() |
isapnp_isolate | static void | Find a valid read port and isolate all ISAPnP cards. |
30 |
![]() |
isapnp_device_activation | void | Activate or deactivate an ISAPnP device. |
31 |
![]() |
isapnp_probe | static int | Probe an ISAPnP device |
32 |
![]() |
isapnp_remove | static void | Remove an ISAPnP device |
33 |
![]() |
isapnpbus_probe | static int | Probe ISAPnP root bus |
34 |
![]() |
isapnpbus_remove | static void | Remove ISAPnP root bus |
目次 | ファイル一覧 | 関数一覧 | ネームスペース一覧 | クラス一覧 | #define一覧 | マクロ一覧 | 外部変数一覧 | 構造体一覧 | 共用体一覧 | 列挙体一覧 | Const一覧 | 索引 | サイドメニュー